article
相关文章简要描述:ode膜片式电磁阀,ODE膜片式电磁阀规格With 2-way normally closed solenoid valve,Resulting in an increase in the force required to open the guide orifice,and in order to avoid the rapid wear of the diaphragm,
ode膜片式电磁阀,ODE膜片式电磁阀规格
So if the pressure difference is greater than the maximum
Has designed the value of the solenoid valve,
The latter does not turn on even when the coil is energized.
For the correct operation of the solenoid valve,
Damage to other parts of the solenoid valve.
There must be a minimum value in this solenoid valve
The pressure difference between the inlet pipe and the outlet
To ensure the normal function of the solenoid valve. however,
Excessive pressure difference between inlet and outlet,
ode膜片式电磁阀,ODE膜片式电磁阀规格
Is desirable, once the valve is closed, the actual flow is not higher than Kv (ie:
Flow through the valve, the pressure loss is 1 bar).
Therefore, if the valve opens when the inlet pressure is higher than 1 bar, that is
It is not advisable to use a valve with a free outlet, ie no export restrictions
The pressure drops to a value of 1 bar.
In addition, the design of the hydraulic circuit must pay special attention to the problem
Water hammering may cause overpressure, such as tearing the diaphragm or
,ODE膜片式电磁阀规格